In home decoration, structural adhesive produced by structural adhesive equipment is an indispensable raw material, which can bond various laminated glass and other boards, and is easy to use and convenient. But many times, the structural adhesive will dry slowly and will also detach. Therefore, in order to improve the drying time of the structural adhesive, we must ensure that it is properly applied, and then use other methods such as heating or direct sunlight to dry it faster.

Unnecessary structural adhesive can be wiped with a towel. When the laminated glass is not dry, simply gently wipe it with a towel, and then add some cold water to rub and remove it.

1. Scrape off with a knife. For relatively smooth objects such as craft glass, if you accidentally get too much structural adhesive, gently scrape off with a knife.

2. Using banana water to slightly dissolve water can effectively dissolve various solvents and eliminate unnecessary structural adhesives.

3. Ethanol can dissolve the vast majority of adhesive compounds, thus eliminating unnecessary structural adhesives.

If you want the structural adhesive produced by the structural adhesive equipment to dry quickly, you should pay attention to the natural environment of your own construction project, and be able to dry the structural adhesive as early as possible by heating or heating methods.

The above is a detailed introduction about how the structural adhesive produced by the structural adhesive equipment dries quickly and how to remove unnecessary structural adhesive. If the structural adhesive accidentally gets on clothes or other places, it can be scraped off with a knife or banana oil.