1. The kneading machine for structural adhesive equipment generally uses a through chassis, which is conducive to installation.

2. Choose bevel gears or hard tooth surface reducers to ensure stable, low noise, and long service life of the server transmission system.

3. The mixing blade and mixing tank are made of SUS304 stainless steel plate or SUS316L material to ensure the purity of the product.

4. The water pump has a good sealing structure and good sealing performance. The unique design scheme features a balanced construction of the vacuum box, ensuring that it is not easy to polish black history.

5. The integrated electrical control system (server operation, hydraulic press cylinder flipping, hydraulic press cover opening, and temperature control operation) and temperature control and temperature display information are beneficial for practical operation and process management.

Detailed introduction of vacuum kneading machine for structural adhesive equipment:

1. The vacuum kneading machine for structural rubber equipment is widely used for mixing, kneading, crushing, blending, vulcanizing rubber, and re polymerization of highly viscous and highly elastoplastic raw materials. The kneading machine has the advantages of uniform stirring, no dead corners, and high kneading efficiency.

The kneading machine is made up of a pair of leaves (usually in a Z-shape) that cooperate and rotate with each other, resulting in significant cutting, extrusion molding, and mixing effects to quickly mix thick raw materials evenly.

2. The structural adhesive equipment vacuum kneading machine can be made into universal, working pressure, vacuum pump, and high-temperature types.

3. Structural adhesive equipment vacuum kneading machines can be divided into carbon steel kneading machines, stainless steel plate kneading machines, and special material kneading machines based on materials.

4. The temperature control method for the vacuum kneading machine of structural adhesive equipment includes steam, oil high-temperature heating, cooling water, and other methods.

5. The feeding methods for the vacuum kneading machine of structural adhesive equipment include hydraulic press, tilting cylinder, gate valve feeding, extruder screw extrusion molding, hydraulic flipping plate feeding, etc. And it can synchronously control and record relevant data information such as temperature, time, viscosity, etc. in production and manufacturing based on PLC.

6. The key components of the vacuum kneading machine for structural adhesive equipment include a kneading part, an electric motor shaft part, a hydraulic transmission system, a transmission device, an ultrafiltration device, and an electronic control system. Pinching a part of it is composed of engine cylinder block, propeller shaft, plate wall, cylinder head, etc. The hydraulic transmission system is controlled by one hydraulic system to control two small hydraulic cylinders and two large hydraulic cylinders, and the kneading machine is used to open and close the large cover and roll the mixing cylinder. The designed working pressure of the control system is 7.0 Mpa. The electronic control system includes manual and fully automatic electronic control systems, which can be selected and specified by customers at will. The actual operation is convenient and reliable. The transmission device consists of a motor, a reducer, and a transmission gear, and is matched with a motor according to the model and specifications of the vacuum kneading machine. During the entire process of the transmission system, the motor can be synchronized with the speed ratio, and after passing through the elastic coupling to the reducer, the output device can drive the system to achieve the required speed ratio. Alternatively, the soft starter can be used for variable speed.